'Skullpture Series' (Carving and Patination - Phase 1) by Shane Wilson
September 01, 2005 Categories: Skullpture Series
The designs for each carving are drawn directly onto the raw bronze prior to carving. (2004-2005) The bronzes below are in various states of design and carving, all preliminary. Two of the skulls (small wolverine and grizzly) were finished and patinated without being carved. I decided to change this later and carved both skulls.
(bronze carving, carved bronze sculpture)
'Skullpture Series' (Carving and Patination - Phase 2) by Shane Wilson
August 01, 2007 Categories: Skullpture Series
Using power grinders and carbide burrs, designed for metal work, the designs are carved and the bases are completed using black granite. Following the carving the surface is smoothed with sandpaper, depending on the kind of patination to be applied. (2004-2007)
Below are a selection of images taken during this phase.
Skullpture Series - Seal 2
Skullpture Series - Large Wolverine 1
Skullpture Series - Grizzly 2
Skullpture Series - Human 2
Skullpture Series - Human 1
Skullpture Series - Wolf 2
(bronze carving, carved bronze sculpture)
Below are a selection of images taken during this phase.
Skullpture Series - Seal 2
Skullpture Series - Large Wolverine 1
Skullpture Series - Grizzly 2
Skullpture Series - Human 2
Skullpture Series - Human 1
Skullpture Series - Wolf 2
(bronze carving, carved bronze sculpture)
'Skullpture Series' (Carving and Patination - Phase 3) by Shane Wilson
August 15, 2007 Categories: Skullpture Series
Prior to patination, it is important to clean the surface of the bronze, to remove impurities and any surface oxidation. The most effective way to do this is to sandblast the surface with a fine grit sand. It is important to avoid touching the surface of the bronze with bare hands after this process, as it will pick up oils and create uneven application/oxidization of the patina.
(bronze carving, carved bronze sculpture)
(bronze carving, carved bronze sculpture)
'Skullpture Series' (Carving and Patination - Phase 4) by Shane Wilson
August 16, 2007 Categories: Skullpture Series
The next stage is to apply the base coat, which in this case is an application of Birchwood Casey applied cold and then rinsed. An alternative base coat would be liver of sulphur, also applied cold. Following the rinsing, the bronze is heated to set the base coat and then the whole is rubbed back with steel wool.
(bronze carving, carved bronze sculpture)
(bronze carving, carved bronze sculpture)
'Skullpture Series' (Carving and Patination - Phase 5) by Shane Wilson
August 25, 2007 Categories: Skullpture Series
Finally it is time to apply the patina! There are numerous oxidizing agents available for patination, all lending a unique look and colour to the bronze. I have chosen to use bismuth nitrate (with varying additions of titanium oxide) and silver nitrate for the human skull and some accents on other pieces (eg. wolverine). The patina is also applied by brush, lending a unique, ringed pattern to the finish. The patina is applied to a hot bronze surface, made so with an open flamed torch. Following the application the entire surface is quenched in water and reheated to dry the bronze and set the patina. The pics below show the patination set up and a variety of pieces in various stages of completion. Note the patina seems much whiter than it will appear after the final coat of lacquer is applied.
(bronze carving, carved bronze sculpture)
(bronze carving, carved bronze sculpture)
'Skullpture Series' (Carving and Patination - Phase 6) by Shane Wilson
August 31, 2007 Categories: Skullpture Series
The patina is fragile and needs to be protected by a couple of coats of lacquer. Since the lacquer lends a plastic look to surface, two coats of Trewax are applied and buffed to dull the surface down and provide additional protection. Voila, the finished bronzes!
The bronzes will be photographed professionally and I'll post the images as they become available.
(bronze carving, carved bronze sculpture)
The bronzes will be photographed professionally and I'll post the images as they become available.
(bronze carving, carved bronze sculpture)
'Skullpture Series - Human 1, 2007' by Shane Wilson (carved bronze sculpture)
September 01, 2007 Categories: Skullpture Series | Portfolio Images
(bronze carving, carved bronze sculpture)
'Skullpture Series - Human 2, 2007' by Shane Wilson (carved bronze sculpture)
September 01, 2007 Categories: Skullpture Series | Portfolio Images
(bronze carving, carved bronze sculpture)
'Skullpture Series' (Beginning) by Shane Wilson
June 29, 2003 Categories: Skullpture Series
skulls left to right: grizzly, black bear, wolf, fox, beaver, lynx, large wolverine, martin, seal, small wolverine, human
The Skullpture Series begins with real skulls. Each skull has been prepped for the mold making process. The natural holes have been filled with Chavant clay to prevent the intrusion of silicone into the skull.
It is necessary to create molds from each of the skulls in order to create wax duplicates, which will then be cast in bronze.
small wolverine skull
Since the technique used to prepare the molds differs depending on the size of the object to be cast, we will follow the mold making process for a small skull, small wolverine (above), and a large skull, grizzly (below).
grizzly skull
(bronze carving, carved bronze sculpture)
'Skullpture Series' by Shane Wilson
May 06, 2009 Categories: Skullpture Series | Portfolio Images
Skullpture Series, 2007 by Shane Wilson (carved bronze skulls) - Artist Statement
"Just as a fossil uncovered is evidence of life, so too, this carved bronze Skullpture Series reflects the architecture of being alive."
Shane Wilson
Skullpture Series - Black Bear 1 and 2, 2007 by Shane Wilson (carved bronze skulls)
Skullpture Series - Grizzly 1 and 2, 2007 by Shane Wilson (carved bronze skulls)
Skullpture Series - Human 1 and 2, 2007 by Shane Wilson (carved bronze skulls)
Skullpture Series - Large Wolverine 1 and 2, 2007 by Shane Wilson (carved bronze skulls)
Skullpture Series - Seal 1 and 2, 2007 by Shane Wilson (carved bronze skulls)
Skullpture Series - Small Wolverine 1 and 2, 2007 by Shane Wilson (carved bronze skulls)
Skullpture Series - Wolf 1 and 2, 2007 by Shane Wilson (carved bronze skulls)
(bronze skullpture carving, bronze skull sculpture)
"Just as a fossil uncovered is evidence of life, so too, this carved bronze Skullpture Series reflects the architecture of being alive."
Shane Wilson
Skullpture Series - Black Bear 1 and 2, 2007 by Shane Wilson (carved bronze skulls)
Skullpture Series - Grizzly 1 and 2, 2007 by Shane Wilson (carved bronze skulls)
Skullpture Series - Human 1 and 2, 2007 by Shane Wilson (carved bronze skulls)
Skullpture Series - Large Wolverine 1 and 2, 2007 by Shane Wilson (carved bronze skulls)
Skullpture Series - Seal 1 and 2, 2007 by Shane Wilson (carved bronze skulls)
Skullpture Series - Small Wolverine 1 and 2, 2007 by Shane Wilson (carved bronze skulls)
Skullpture Series - Wolf 1 and 2, 2007 by Shane Wilson (carved bronze skulls)
(bronze skullpture carving, bronze skull sculpture)